SABRYA silver 1 lt
Decorative coating to metallic-looking finish pelescente.
Lets get trim surfaces by special metallic effects with contrasts of light
enhance the interiors, classic and modern.
Requires its own SABRYA CLASSIC FUND
Application: brush spalter.
Dilution: up to 10% -15% with water
Theoretical: 10-12 sqm / l per coat.
Interior decorative finish with a pearlescent metallic-looking finish. Lets get trim surfaces by special metallic effects with contrasts of light that enhance the interiors, classic and modern. Requires its own SABRYA CLASSIC FUND.
Color: SILVER - GOLD - METAL - RED VENICE (see color chart).
Specific weight: 0,98 kg / l
Resin / Binder: Synthetic Emulsion
Dry residue: 49% ± 0.5
Aspect of the film: Matte Pearlescent
Resist / Dry:> 10,000 cycles Gadner
Washability: 15 days
Water vapor permeability: low
VOC content: 3.1 g / l
Dirt pick: Low
Temperature: 5 ° C Min - Max 35 ° C
Relative Humidity: <60%
Preparation: Stir before use
Thinner: Drinking Water
Indicative spreading rate: 6-8 m² / l for hand
Number of coats: 2
Drying time: 1 hour to touch, painted over 6 hours, 24 hours total.
-Works Walls unpainted
Make sure that the media is completely cured and dry. The surfaces must be firm and should not tend to crumble. Otherwise provide for their consolidation with specific products. Completely eliminate the presence of pre-existing solvent coatings. Remove buffing or sanding, any efflorescence. Level any irregularities with plaster and stucco CARSON STUCK in pasta or READY 4U. Sand and smooth with medium grit sandpaper. Remove any dust, smog and other by brushing and washing with water. If mold is present, treat the surfaces with specific products mold cleaning and healing.
Use as an insulator, inside and outside, in all cases where you need more power leveling and consolidating the acrylic fixative FIX.
Apply one or two coats of Unidecor (Base evening for decorative siloxane) with a brush or roller (hands crossed).
Indicative spreading rate: 6-8 m² / l. Drying (under optimal conditions): 24 hours. Dilute with water to 10-15% and apply 2 coats until complete saturation of the plaster. After 6-8 hours (under optimal conditions), start applying the finish. Indicative spreading rate: 10-12 sqm / l. The fund may be applied to white or colored in the same tone of the finish, or in different shades to obtain a contrast effect.
-Effect Brushstroke: Classic Sabrya dilute with water to 10-15% of Spalter and apply with hands crossed until complete saturation of the plaster avoiding riquadrature or long strokes. Wait 4-6 hours between coats.
- Rain Effect: Classic Sabrya dilute with water to 5-10% and apply with a brush in two coats following the brush in one direction only, preventing accumulation of product.
- Effect Texture: apply the bottom with short-haired roller and after drying (6-8 hours) apply with a brush Sabrya Classic spalter, without diluting, smoothing in horizontal and vertical directions.
After use, close the jar thoroughly without adding water. Store in a cool, dry place at a temperature below 5 ° C. Protect from frost. The preserved original packaging maintains the characteristics of the product for a period of at least 24 months from date of manufacture.
WARNING: SELECT BELOW THE MODEL YOU WANT TO ORDER!